MCTS: Connecting To Networks MCQs
MCTS: Connecting To Networks MCQs
Our experts have gathered these MCTS: Connecting To Networks MCQs through research, and we hope that you will be able to see how much knowledge base you have for the subject of MCTS: Connecting To Networks by answering these 30 multiple-choice questions.
Get started now by scrolling down!
1: In this wireless authentication mode - Windows authenticates prior to logon by using computer credentials. After logon - Windows submits user credentials.
A. Computer or user
B. Remediation Server Groups
C. End-to-edge protection and end-to-end protection
D. PKI
2: To create a PKI and enable autoenrollment so that domain member computers have the necessary certificates to support WPA-EAP wireless authentication - follow these steps:
A. Configuration Model drop-down list - select Enabled.
B. Remediation Server Groups
C. PKI
D. Remote RADIUS Servers
3: This NPS template configures IPv4 or IPV6 filters to configure which networks can connect.
A. IP Filters
B. Datacenter
C. HTTP
D. IPv6
4: SSTP uses PPP authentication methods for user-level authentication and HTTP encapsulation over a _____ channel for data authentication - data integrity - and data encryption.
A. RADIUS
B. Secure Sockets Layer (SSL)
C. IPsec
D. PKI
5: Client IPv4 Address and Client IPv6 Address - Controls access based on the IP address of the client when the Win Server 2008 computer is acting as a ______ server.
A. Remote RADIUS Servers
B. RADIUS
C. IPv6
D. You must add the Network Policy And Access Services role to configure the server as a RADIUS server.
6: SSTP is supported only by Win Server 2008 (as a VPN server or client) and Win Vista with Service Pack 1 (as a VPN ______).
A. Client
B. Microsoft Point-to-Point Encryption (MPPE)
C. IPv6
D. Allow Access
7: L2TP uses PPP authentication methods for user-level authentication and ______ for computer-level peer authentication - data authentication - data integrity - and data encryption.
A. PKI
B. Remote RADIUS Servers
C. IPsec
D. End-to-edge protection and end-to-end protection
8: Win XP wireless network policies apply to clients running Win XP with SP2 and ______.
A. NPS templates
B. Win Server 2003
C. WPA-EAP (also known as WPA-Enterprise)
D. Protocol 41 - inbound and outbound - UDP destination port 3544 - inbound - UDP source port 3544 - outbound - TCP destination port 443 - inbound - TCP source port 443 - outbound
9: This NPS template configures remediation server groups - which are groups of servers that unauthenticated clients can access.
A. The Windows XP
B. Internet Key Exchange version 2 (IKEv2)
C. Microsoft Point-to-Point Encryption (MPPE)
D. Remediation Server Groups
10: To use VPN Reconnect - both the VPN client and server must support the ______ VPN protocol.
A. PKI
B. Internet Key Exchange version 2 (IKEv2)
C. L2TP
D. Network Policy And Access Services
11: If you have existing RADIUS servers and you need a layer of abstraction between the access points and the RADIUS servers - or if you need to submit requests to different RADIUS servers based on specific criteria - you can configure Win Server 2008 or
A. RADIUS proxy
B. 192.168.0.1
C. L2TP
D. Remediation Server Groups
12: SSTP requires that the VPN server has a computer ______ installed and that clients trust the CA that issued the computer certificate.
A. VPN
B. RADIUS proxy
C. HTTP
D. Certificate
13: Win Server 2008 R2 Enterprise and Win Server 2008 R2 ______ support NPS without restrictions.
A. Certificates
B. HTTP
C. You must add the Network Policy And Access Services role to configure the server as a RADIUS server.
D. Datacenter
14: This NPS template stores RADIUS shared secrets - allowing you to configure them without typing the shared secret at different computers.
A. Health Policies
B. Shared Secrets
C. Point-to-Point Tunneling Protocol (PPTP) - Layer Two Tunneling Protocol (L2TP) - Secure Socket Tunneling Protocol (SS TP)
D. WPA2.
15: Win Server 2008 R2 ______ supports NPS with a maximum of 50 RADIUS clients and 2 remote RADIUS server groups.
A. End-to-edge protection and end-to-end protection
B. Win Server 2003
C. Standard
D. Point-to-Point Tunneling Protocol (PPTP) - Layer Two Tunneling Protocol (L2TP) - Secure Socket Tunneling Protocol (SS TP)
16: Win Server 2008 R2 can authenticate clients when they connect to wired or wireless networks by using ______.
A. Automatically applied
B. Network Policy Server (NPS)
C. Web
D. Computer or user
17: If your DirectAccess server is connected to the IPv4 Internet - allow the following types of packets:
A. Protocol 41 - inbound and outbound - UDP destination port 3544 - inbound - UDP source port 3544 - outbound - TCP destination port 443 - inbound - TCP source port 443 - outbound
B. -d
C. Gpupdate - net stop iphlpsvc - and net start iphlpsvc
D. IPv6
18: ______ is the only VPN technology that can be used across the IPv6 Internet.
A. L2TP
B. Microsoft: Protected EAP (PEAP)
C. Shared Secrets
D. Internet Key Exchange version 2 (IKEv2)
19: This NPS template stores remote RADIUS servers.
A. Certificate
B. Automatically applied
C. Remote RADIUS Servers
D. Windows 7 and Windows Server 2008 R2
20: This NPS template allows you to quickly configure the same RADIUS clients on different servers.
A. IPv6
B. RADIUS Clients
C. Computer only
D. IPsec
21: To improve Tracert performance - add the ___ parameter before the IP address to prevent DNS lookups.
A. Computer or user
B. PKI
C. -d
D. RADIUS proxy
22: To configure Win Server 2008 R2 as a RADIUS server - first add the ______ role.
A. Microsoft: Secured Password (EAP-MS CHAP v2)
B. Network Policy And Access Services
C. You must add the Network Policy And Access Services role to configure the server as a RADIUS server.
D. Microsoft: Protected EAP (PEAP)
23: This authentication method requires computer certificates to be installed on all RADIUS servers and requires all client computers to trust the CA that issued the computer certificate installed on the RADIUS server.
A. Microsoft: Secured Password (EAP-MS CHAP v2)
B. RADIUS Clients
C. End-to-end protection
D. Cannot log
24: Using ______ encapsulation allows SSTP to traverse many firewalls - NATs - and proxy servers that would cause PPTP and L2TP to fail.
A. Internet Key Exchange version 2 (IKEv2)
B. HTTP
C. Shared Secrets
D. End-to-end protection
25: DirectAccess requires the following _________________ to support IPv6 communications (which can include IPv6 translation technologies).:A DirectAccess server running Win Srvr 2008 R2 that is a member of a domain (but not a DC). - Clients must be dom
A. Allow Access
B. NPS templates
C. Shared Secrets
D. Application servers and network infrastructure
26: If no Win Vista wireless network policy exists - computers running Win Vista - Win 7 - and Win Server 2008 will apply ______ policy.
A. Protocol 41 - inbound and outbound - UDP destination port 3544 - inbound - UDP source port 3544 - outbound - TCP destination port 443 - inbound - TCP source port 443 - outbound
B. You must add the Network Policy And Access Services role to configure the server as a RADIUS server.
C. Remediation Server Groups
D. The Windows XP
27: With ______ DirectAccess clients connect directly to application servers using IPsec.
A. Client
B. IP Filters
C. WPA-EAP (also known as WPA-Enterprise)
D. End-to-end protection
28: In this wireless authentication mode - Windows authenticates to the wireless network prior to displaying the Windows logon screen.
A. Protocol 50 - inbound and outbound - UDP destination port 500 inbound - UDP source port 500 outbound - UDP destination port 4500 inbound - UDP source port 4500 outbound - ICMPv6 - inbound and outbound
B. 192.168.0.1
C. Computer only
D. Health Policies
29: L2TP requires both the VPN clients and servers to have computer ______.
A. Network Policy And Access Services
B. DirectAccess
C. Computer or user
D. Certificates
30: Windows Server 2008 and Windows Vista support three VPN technologies:
A. Point-to-Point Tunneling Protocol (PPTP) - Layer Two Tunneling Protocol (L2TP) - Secure Socket Tunneling Protocol (SS TP)
B. Standard
C. Microsoft: Protected EAP (PEAP)
D. RADIUS
List of MCTS: Connecting To Ne...
Available in:
MCTS: Connecting To Networks MCQs
