MCTS: Configuring IP Routing MCQs
MCTS: Configuring IP Routing MCQs
These MCTS: Configuring IP Routing multiple-choice questions and their answers will help you strengthen your grip on the subject of MCTS: Configuring IP Routing. You can prepare for an upcoming exam or job interview with these MCTS: Configuring IP Routing MCQs.
So scroll down and start answering.
1: Win Srvr 2008 R2 can also forward multicast communications between subnets using the ______ routing protocol.
A. Block
B. Internet Group Management Protocol (IGMP)
C. You would use the route add command.
D. Route -p add 10.2.2.0 MASK 255.255.255.0 192.168.1.2
2: To enable Win Server 2008 R2 to respond to ICMP requests - run the following command at an administrative command prompt:
A. Route -p add 10.2.2.0 MASK 255.255.255.0 192.168.1.2
B. You would use the route add command.
C. Netsh advfirewall firewall add rule name=ICMP Allow incoming V4 echo request protocol=icmpv4:8 -any dir=in action=allow
D. Static routes
3: To configure the IGMP routing protocol - add the _____ server role - configure Routing And Remote Access for LAN Routing
A. Latency in milliseconds (ms)
B. Internet Group Management Protocol (IGMP)
C. Block
D. Network Policy And Access Services
4: You would run the following command to add a static route to the network:
A. PathPing
B. Route -p add 10.2.2.0 MASK 255.255.255.0 192.168.1.2
C. IGMP multicasting
D. Netsh advfirewall firewall add rule name=
5: Routers have to be specially configured to forward IGMP multicasts; otherwise - they will ______ the multicasts from being forwarded.
A. Netsh advfirewall firewall add rule name=
B. Latency in milliseconds (ms)
C. Route -p add 10.2.2.0 MASK 255.255.255.0 192.168.1.2
D. Block
6: Windows Server 2008 R2 supports ______ version 2 - a popular routing protocol.
A. Netsh advfirewall firewall add rule name=ICMP Allow incoming V4 echo request protocol=icmpv4:8 -any dir=in action=allow
B. Route -p add 10.2.2.0 MASK 255.255.255.0 192.168.1.2
C. Static routes
D. Routing Internet Protocol (RIP)
7: You can use the _____ and Tracert commands to determine how packets travel between your computer and a destination.
A. Static routes
B. IGMP multicasting
C. PathPing
D. Network Policy And Access Services
8: Notice that PathPing shows the data in two sections. The first section shows the route from the source to the destination. The second section takes longer to generate and shows the ______ to each router.
A. Latency in milliseconds (ms)
B. Internet Group Management Protocol (IGMP)
C. Route -p add 10.2.2.0 MASK 255.255.255.0 192.168.1.2
D. Block
9: Are required when multiple gateways are connected to the local network - and one or more of them does not act as a default gateway.
A. Route -p add 10.2.2.0 MASK 255.255.255.0 192.168.1.2
B. IGMP multicasting
C. Static routes
D. Network Policy And Access Services
10: Transmits communications from one server - many clients.
A. Netsh advfirewall firewall add rule name=ICMP Allow incoming V4 echo request protocol=icmpv4:8 -any dir=in action=allow
B. Routing Internet Protocol (RIP)
C. IGMP multicasting
D. Latency in milliseconds (ms)
11: What command would you use to configure a static route?
A. You would use the route add command.
B. Route -p add 10.2.2.0 MASK 255.255.255.0 192.168.1.2
C. IGMP multicasting
D. Block
12: A ____ router can build tables that identify addresses on each network.
A. Pervasive
B. Passive
C. Dynamic
D. Static
13: A _______ joins two or more networks and passes packets from one network to another.
A. Router
B. Bridge
C. Switch
List of MCTS: Configuring IP R...
Available in:
MCTS: Configuring IP Routing MCQs
